Stage is actually 26/27.5 but the 27.5 specific Pike shouldnt be an issue. I probably had the same reasoning as you, had a 26 but future plans to go 27.5 and wanted to try a new fork and spread out the costs. A2C was within a couple mm and the swap didn't cause any handling issues. Loved the new fork for the last few months of the riding season

1. Use the Parts list in the App. If you have a Cannondale bike from model year 2019 and newer, the Parts section of the app should have the info you need: 2. Look at the sidewall of your front tire. You can also look at the sidewall of your front tire for a wheel size and tire width designation.

Take this tire measurement, compare it to the list below, and click the link for my recommended inner tube for your 700c tires. Recommended inner tubes for 700c tires. 700c x 22 tube. DETAILS. 700c x 23 tube. DETAILS. 700c x 25 tube. DETAILS. 700c x 28 tube. Noisy rear hub. The Norco Fluid FS 4 is the best budget-friendly full-suspension mountain bike we have ridden by a healthy margin. This bike exudes confidence on the descent and felt extremely composed and capable on difficult terrain. In fact, it was easy to forget we were riding a "budget" bike while we found the flow.

The 27.5 version takes up to a 2.8 inch tire and runs out to 170mm. The 29er chassis is spec at 27.5x3 and 29x2.6 up to 160mm. From personal experience, I can say the 29 chassis will take a 29x2.8 inch and some 29x3 inch tires. The MRP Ribbon is an amazing fork.

Technically you get more tire choices in 27.5, but you will be limited in the width of tire you can fit on your frame, so the gain is marginal at best. I ride both wheel sizes and I promise you that the geometry changes you’ll get from the upgrade aren’t worth it. I’d only do it if I didn’t have a decent 26 inch wheelset on the existing AJ5jAv. 309 177 212 332 208 15 227 279 171

can you put 27.5 on a 26